Suggestions & Feedback

Have an Idea or recommendation for a new mod? Comment below and I’ll see if it’s something I can create for you.

42 Responses to “Suggestions & Feedback”

  1. Robert July 12, 2020 at 4:12 pm Permalink

    Can you produce a lanyard mounting bracket for the EVO II controller? I see a few different homemade brackets out there, but I think something that would connect to the controller using the screw in the back center would make the most sense. Thoughts?

  2. Greg July 11, 2020 at 12:09 am Permalink

    Do the EVO stobe mounts fit the Evo 2? Can they be printed in clear that allows some light spill to the sides?

    • admin July 11, 2020 at 12:38 pm Permalink

      Yes the will. If you want them printed in clear make a note on your order at checkout and I will print them in clear for you.

  3. Frank September 23, 2019 at 8:51 pm Permalink

    Have you considered producing a tablet grabber for the PowerVision PowerEgg.
    Frank Wadeson

    • admin September 23, 2019 at 8:58 pm Permalink

      I can, Just need to know what the Dimensions would/should be

      • Frank September 25, 2019 at 4:17 pm Permalink

        How do you measure the dimensions? The poweregg doesn’t have an extendable arm like the EVO. I could send a photo.

  4. Ron August 30, 2019 at 9:56 pm Permalink

    Recently received number of items for my Autel Evo, thanks. One suggestion regarding motor covers, had to cut down two of them for lower arm motors as as they impeded the arms from fully folding into the body, felt they were causing stress on the arms. Otherwise very satisfied with all the items.

    • admin July 12, 2020 at 9:13 pm Permalink

      The height has been adjusted based on your experience and feedback Thanks, Martin

  5. Phillip J March 22, 2019 at 5:59 am Permalink


    Purchased the Trackimo mount. Doubles as a nice cell phone platform. In regard to Flir One Pro, would be nice if you made a slide in gimbal, the could be mounted vertically or horizontally. Or continuous angle.

  6. kratos187 March 21, 2019 at 9:53 pm Permalink

    for the y bearing bed mount drill hole locator jig where can i get this i need this to do this mod

    • admin July 12, 2020 at 9:14 pm Permalink

      You should receive a link to the jig stl download in your My account area after your placed your order. Thanks, Martin

  7. brikerbish March 9, 2019 at 9:53 pm Permalink

    I’m interested in the Big Boy Blue kit so that I can solidify the 2 Titan Aeros that I have running dual extrusion on my CR10. With all that extra weight, they flex more than I’d like.
    You offer a Titan Aero mount already, any chance you’re working on a dual (mirrored) mount? I’m also running an EZABL and 5015 fans.

    • admin March 10, 2019 at 6:19 pm Permalink

      I can model what you’ve requested and forwarded you an email.

  8. kev.scott January 17, 2019 at 10:32 pm Permalink

    I have a CR10S4.. will the Big Boy Blue mod work with this printer?

    • admin March 10, 2019 at 6:20 pm Permalink

      Yes it will, all you would need to do is increase the length of all the Rods used to match your dimensions. The printed parts as is are able to work with your printer.

  9. kratos187 January 6, 2019 at 10:37 am Permalink

    what is the easiest way to mout the 4Pcs SCS12UU Linear Motion Ball Bearing CNC Slide Bushing to the under carriage

    • admin July 12, 2020 at 9:23 pm Permalink

      You will have a link to the stl file that helps align the bearings in your My account Area after your order.

  10. james November 17, 2018 at 7:04 pm Permalink

    on this mod u have the dualz did u have the original melzi board or the new cr10 10s board ?

    • admin November 17, 2018 at 7:31 pm Permalink

      I upgraded my Cr10/s to use a duet wifi board which is a 32 bit board vs an 8 bit board.

  11. kratos187 November 4, 2018 at 10:00 am Permalink

    are you still selling the full kit for the cr10? on the z lead screw what is the brass part holding ontop of the part thats on a 45 degree angle. can u get back to me please

  12. Bob October 25, 2018 at 11:34 am Permalink

    Your Ebay link for the Creality CR10/S Big Boy Blue Mod, 12mm x 500mm Linear Rods Y Axis links to 10mm instead of the 12mm

    • admin October 25, 2018 at 11:37 am Permalink

      I can model the files that you like to support 10mm rods at the time of your order. Just make a note with your order mentioning the required 10mm parts

  13. Joseph June 26, 2018 at 10:42 am Permalink

    Where do you mount the controller case you link to as part of the “BayBoyBlue” mod for the CR-10? It is too large to fit within the undercarriage – at least on the unmodified CR-10. Thanks.

  14. tee December 3, 2017 at 4:44 am Permalink

    how do we purchase if we are overseas?

    greetings from australia

    • admin June 14, 2018 at 1:07 pm Permalink

      We ship to Australia, just need to provide shipping address at checkout.

  15. Ryan April 18, 2017 at 12:13 pm Permalink

    Is it possible to redesign the “feet” of the gear so they angle out and away from the drone center or away from the camera? I would hope, if it’s feasible, that this would reduce the chances of getting the landing feet in the photos/videos. Thanks!

  16. Greg February 25, 2017 at 1:07 pm Permalink

    Can you create a battery compartment cover for the Autel X-Star Premium? something that will cover up the hole when there is no battery installed? Does not have to be to the same tight tolerance as the batteries. I don’t think it even needs to have the latches to hold it in.

    • admin February 25, 2017 at 2:40 pm Permalink

      I will get some measurements and see what I can come up with for you…

  17. Phillip January 23, 2017 at 8:40 pm Permalink

    Can you produce this for sale:

    • admin January 23, 2017 at 11:21 pm Permalink

      Can do. Full credit given to the original designer
      orangeUAVpilot over at youtube.

  18. Jimmie Lee November 2, 2016 at 11:58 am Permalink

    I need to mount a trackimo on my Phantom 4. Will the one for P3 fit on it?

  19. Kevin October 25, 2016 at 12:12 am Permalink

    Priority mail the only option available Scott? I had the first class option this afternoon, which was a little more reasonable. I’m in no rush for it.

  20. adrian September 25, 2016 at 8:14 pm Permalink

    Any chance of getting the landing gear in white like you have for the gimbal guard?



    • admin September 25, 2016 at 9:04 pm Permalink

      Not a problem, Let me know if you want a set and I’ll print one up.

Leave a Reply