These wall hangers come in several sizes to accommodate all your arm thicknesses and esc’s
Easy to mount on your wall and easier to hang up your drones for safe keeping, storage and display.
Make sure to pick the correct thickness for your setup. Your thickness should be the carbon fiber arm thickness plus any esc that may be near the motor. Also if you have rubber landing pads measure those as well. Normally 3-4mm carbon fiber arms require the 6mm mounting brackets. If you have rubber landing pads or your esc’s are real close to your motors the 12mm are a good choice. If your not sure but wanna play it safe go for the 15mm thickness mounting brackets, they will work with pads and esc’s near the motor.
Each set contains 1 pair, left and right mount bracket.