These reinforcement plates are intended to prevent stress cracks in your phantom 3 shell. It is a known problem with DJI Phantom’s body shell where over time the shell can begin to get stress cracks where the motors mount into the body of the drones shell supports. Use these motor mount reinforcement plates to prevent stress cracks and stop any you may already have from getting worse.
In this kit you receive 4 motor mount reinforcement plates.
Weighs less than a gram
You will need for each plate the following screws:
2 – M2.5×16 Arm Mounts
4 – Motor M3x12
Available separately on ebay or from hobby stores
Helpful tip: If you nee a complete set of all screws needed for your Phantom 3 go here. They are very affordable and an Authorized DJI Product.