This printed parts kit is for the Creality CR10 and CR10S models. They may also fit the larger versions the 400/500 as well.
Easy installation assembles with M3 screws and M4 screws (not included).
These printed parts for this mod will allow you to convert your cr10/s to a direct drive unit with 12mm Liner rods for the Y axis and 8mm rods for the X axis. All printed parts seen in illustrations for your color selection are included in this mod kit. With this mod installed you will take your printing quality to the next level. Some parts may also be printed in ABS where required if applicable.
If you need some appropriate wire for this Mod Amazon has a good deal on 30awg wire. A spool with various colors and more than enough for this and many other future Mods LINK
Also if some of the links below no longer are valid try here.
I have also made available for free a nice under the bed mount for your controller that can be printed that will allow you to relocate your printers controller from the cr10’s controller box (Adapter Plate Included for Controller Board Creality V2) to an all in one fixed mounted position on your printers frame as well as a PSU mount that mounts your PSU to the printers frame. Available on thingiverse. Controller Case LINK | PSU Case LINK
Black, Blue, Lime Green, Powder Blue, Purple Haze, Red
Base Kit, Y Axis Only